Long before it reached the runway, the aviator jacket was a piece of workwear, built to fly in an unheated cockpit, sometimes at temperatures of minus fifty degrees. Its history runs through a handful of military models, each named with a letter and a number, from the American A-2 of 1931 to the B-3 worn by bomber crews. Here, in our Style section, is what these references really tell us about the garment, and how they still differ today.
Aviator Jacket: the Landmark Models, From the A-2 to the B-3
| Model | Service | Entered service | Material | Distinguishing feature |
|---|---|---|---|---|
| A-2 | US Army Air Corps | 1931 | Horsehide, later cowhide and goatskin | Snap-fastened leather collar, zip front |
| B-6 | US Army Air Corps | 1939 | Shearling, lighter than the B-3 | Built for enclosed-cockpit aircraft |
| B-3 | US Army Air Corps | 1934 | Shearling (sheepskin) | Thick lining for high-altitude flying |
| G-1 | US Navy | 1940, name fixed in 1947 | Chrome-tanned goatskin, mouton collar | Made famous by the film Top Gun |
| Irvin | Royal Air Force | Early 1930s | Sheepskin lining, leather outer shell | Designed by American Leslie Irvin |
| MA-1 | US Air Force | 1950s | Nylon, no leather | Reversible orange lining for search and rescue |
These six models did not really succeed one another, some overlapped, depending on flying altitude, aircraft type and branch of service. What they share is the garment’s original purpose, keeping a pilot warm, before its cut became a wardrobe staple in its own right.
Where This Piece of Military Workwear Comes From
In the early days of military aviation, cockpits were open and aircraft offered no protection from the wind. As early as the First World War, pilots flew at altitude in sharply negative temperatures, and the US Army set up a dedicated clothing board in September 1917 to meet this need. The first garments issued were made of heavy leather, sometimes fur-lined, with little standardization from one squadron to the next.
That craft-based period ends with the arrival of a standardized, mass-producible garment, designed for a precise use rather than general comfort. This logic, one model for one flying need, gives rise to the letter-and-number naming system still used today, from the A-2 to the B-3, and on to the Navy’s G-1.
The A-2, the US Army Air Corps’ Signature Jacket
The A-2 is adopted as standard issue by the US Army Air Corps on May 9, 1931, under a precise technical specification that fixes its cut and materials. The first examples are cut from chrome-tanned horsehide, lined with cotton; cowhide is approved in 1940, then goatskin in 1941, as leather supply tightens.
Its silhouette breaks from earlier jackets. A zipper and hidden snap fasteners replace buttons, a shirt-style leather collar, closed by discreet snaps and a hook-and-eye at the throat, replaces the knitted collar of earlier models, and stitched-down shoulder straps complete the cut. Crews, pilots, navigators and bombardiers alike, quickly turn it into a personal garment: squadron patches, nicknames painted on the back, decorations embroidered straight onto the leather.
Official A-2 production stops in 1943, administratively replaced by other references, but the Army keeps enough stock for the model to remain in use through the end of the war; its specification is only formally cancelled in 1951. Demand never quite dies out, and the US Air Force allows the A-2 to be worn again starting September 18, 1987, before relaunching production with first deliveries in May 1988, just as cinema was putting the flight jacket back in the spotlight.
The B-3, the Bomber Crews’ Jacket
The B-3 answers a different need. It enters service on May 8, 1934, built for open-cockpit and high-altitude flying, where the A-2 no longer suffices. Its shearling lining covers the body, sleeves and a tall collar, while the outer skin, drawn from horse, cow or lamb hide, is treated to resist water, fuel and engine oil. The garment remains in service throughout the Second World War, worn by heavy bomber crews who flew at high altitude in cabins that were neither heated nor pressurized.
The B-6, a Lighter Version
As the US Army Air Corps fields more enclosed-cockpit aircraft, the need arises for a jacket just as warm but less bulky. The B-6, standardized in June 1939 according to specialists in historical reproduction, carries over the B-3’s shearling in a lighter version, with a distinct cut, slightly longer at the back and flared at the hem. Less documented than its predecessor, it fills an intermediate spot in the same family of garments.
After the War: the G-1, the Irvin and the Nylon Break
This history does not stop at American military leather. Other services and other decades added their own references, some still recognizable today.
The G-1, the American Navy Equivalent
While the Army Air Forces develop the A-2 and then the B-3, the US Navy evolves its own line from a specification dated March 1940. The name G-1 appears internally as early as 1943, but it is the 1947 specification, amended in 1949, that first fixes the label “G-1 Flight Jacket.” The jacket, in chocolate brown chrome-tanned goatskin with a mouton collar, equips naval aviators, flight officers and aircrewmen across the Navy, the Marine Corps and the Coast Guard. Its fame reaches well beyond military ranks in 1986, when Tom Cruise wears it in the film Top Gun, which has since inspired countless commercial versions.
The Irvin, the British Answer
The Royal Air Force equips itself with a different jacket, developed by an unlikely American, Leslie Irvin, a former stuntman turned parachute maker. He sets up his factory in Letchworth, in the United Kingdom, as early as 1926, and develops a sheepskin-lined jacket with a leather outer shell, approved by the British Air Ministry in the early 1930s. The Irvin equips RAF pilots through the Battle of Britain and most of the Second World War, production that rising demand forces the company to subcontract to several workshops.
The MA-1, When Nylon Replaces Leather
The last chapter of this story changes material entirely. Developed in the 1950s from the B-15, itself derived from the B-10, the MA-1 drops leather for a thinner nylon, suited to the arrival of jet aircraft. The mouton collar disappears, deemed incompatible with parachute harness straps, replaced by a flat knit collar. Its reversible orange lining lets a downed pilot signal his position to rescuers simply by turning the garment inside out. Manufacturer Alpha Industries wins the production contract in 1963, a name that has stayed linked to the model ever since.
Aviator Jacket or Bomber Jacket: One Family, Two Names
The question comes up often, do aviator jacket and bomber jacket name the same piece? In everyday retail use, yes, most of the time, both terms cover the same short silhouette, drawn in at the waist and cuffs by ribbed knit. The word bomber comes from an English term, popularized by the nylon versions derived from the MA-1, then extended by retailers to any jacket of this cut, leather included.
This family stands apart from another classic of the leather wardrobe, the perfecto jacket, born in motorcycling rather than aviation. The perfecto is identified by its asymmetric zip, its lapel collar and its belt, while the other garment keeps a centered zip, a straight or shearling collar, and a shorter cut, with no belt.
Recognizing and Choosing a Genuine Leather Flight Jacket
Beyond the name, a few markers help judge the quality of a piece sold under this label. Material remains the first criterion, cowhide or goatskin for a silhouette close to the A-2, shearling for a version close to the B-3 or the G-1, each with its own upkeep. The collar gives a reliable clue to the model’s lineage, a leather collar closed by snaps points to the A-2 line, a mouton or shearling collar to the B-3, B-6 or G-1 line.
Cut matters too. A genuine model stays short, ends at the waist and carries no belt or long front panel, unlike a car coat or a dressier leather jacket. Finishing, finally, signals build quality, dense, elastic rib knit at cuffs and waist, double stitching at the armholes, a metal rather than plastic zipper. To compare budgets, our guide to the price of a luxury leather jacket places heritage houses alongside couture leather.
Wearing and Caring for This Leather Jacket
This piece left military runways long ago to enter everyday wardrobes, worn over jeans, tailored trousers or a dress, depending on the era and the house reinterpreting it. Runways return to it regularly too, Paris fashion week recently offered lighter, perforated versions of its own.
Care follows the same rules as any classic smooth leather for models in cowhide or goatskin, regular conditioning cream and cleaning kept away from direct heat. A shearling model, closer to the B-3, the B-6 or the G-1, needs more caution, since its inner lining tolerates neither water nor vigorous brushing. Our practical guides in the Care section cover these steps piece by piece.
Key Takeaways
- This garment was born in military aviation, to protect against the cold of unheated cockpits, not as a fashion piece.
- The A-2 (1931) is made of leather, with a snap-fastened collar; the B-3 (1934) is lined with shearling for high-altitude flying.
- The US Navy’s G-1, the British Irvin and the nylon MA-1 complete the same history, each with its own material and use.
- The word “bomber jacket” now covers, in retail use, the same family of short jackets with ribbed collar and cuffs.
